Different Types of Heavy Duty Foundation Bolts

Foundation bolts are manufactured by casting wrought iron or mild steel rods and are used to fasten machines to foundations. The size of the bolt to use depends on the volume of the machinery and the immensity of the power of the machinery while in use. Manufacturers of f-bolts make them strong enough as they provide the required strength and support to the structure. It also helps provide a strong enough foundation for the entire structure.

In order to put the foundation bolts in the right places, the positions are marked. After this, they are suspended in the holes. The space around the studs is then filled with concrete and once the concrete sets, the studs are firmly secured into the ground. There are various types of bolts made by foundation bolt manufacturers that are used for various purposes. Let’s take a look at them.

Bent foundation bolt

These are cast into a bent shape and then set into the concrete. Sometimes the machines need to be placed on stone beds, and this is where the bent bolts need to be set in lead. For a very stable and firm foundation, the bolts are first driven into lead and then set into cement concrete, making it very strong.

eye base bolt

The eye bolt is the simplest foundation bolt. At one end, it is placed in an eye and then a crisscross piece is attached to it. It is set into the cement concrete and helps ensure machinery stays in place.

Lewis foundation bolt

This Lewis is a removable stud where his body from the side is narrow in width. A concrete pit is made with the help of a foundation block to use this bolt. It is placed in such a way that the tapered end bears against the narrow face of the cement concrete pit after setting. Into this is inserted a key that opposes the straight surface of the bolt and the pit. This key can be used later to remove the bolt from the surface. However, this arrangement makes the bolt very secure in cement concrete.

rag base bolt

The rag has a narrow body with an intersecting rectangular or square section. The narrow edges are hollow. These are first set in lead and then cement concrete, making the foundation very firm and secure.

Cotter pin foundation bolt

The cotter pin is used to secure machinery that is very heavy. To secure a cotter pin, make a rectangular slot in the bottom end. At first, the foundation bed is made so that the bolts can be placed in the correct positions. Helps provide holes for inserting the key.

Here are some manufacturer made cotter fasteners that can be used in conjunction with standard washers and nuts. These bras are made using superior quality raw materials and highly advanced production methods.